Loading... Please wait...

New Raymarine a9, a12 & gS19 -- aboard the mighty Raymariner

Posted

New Raymarine a9, a12 & gS19 -- aboard the mighty Raymariner

Raymarine_a9_gS19_a12_aPanbo.jpgRaymarine recently announced three new multifunction displays, extending the multitouch aSeries to 9- and 12-inch screen sizes, and the glass bridge gS Series to 19 inches (the proportions of my collage are approximate). Given four additional a9 and a12 models with digital sounder or Chirp DownVision built in and the fact that all these new MFDs can network with all the aSeries, cSeries (non touch), eSeries (hybrid touch), and gS models already available, is any other manufacturer offering so much choice? They all run the same software -- now up to Lighthouse II, release 10 -- so you may already be familiar with most of the features, but the new MFDs do have a few new hardware highlights, some of which I got to see in action aboard Raymarine's remarkable testing vessel...

Raymariner_in_Cowes_cPanbo.jpg

Raymariner is a highly customized Hardy 42. The abundance of wind sensors, radar scanners, and GPS mushrooms visible in this photo only hint at what's inside. 

testing_a12_GPS_aboard_Raymariner_cPanbo.jpg

Here you can see four of the eight main testing stations, each with a big removable panel which can be set up with displays back at the R&D center in Fareham. -- doing some final checks on the new "10Hz Fast Acquisition GPS with GLONASS, WAAS / EGNOS /MSAS" built into the a12 (and a9). Note the extensive patch panel, which meant in this case that Tony could easily unplug the optional external GPS antenna...

Raymarine_a12_internal_GPS_aPanbo.jpg

The performance was stunning. With the exterior antenna attached, the a12 got a fix very quickly and was soon using 22 satellites -- note that the signal strength bar chart scrolls -- with an EHPE (estimated horizontal position error, or 50% confidence circle) of one foot! LightHouse II diagnostic screen can indicate which GPS antenna is in use.Great improvements in Ray diagnostics, particularly regarding third party NMEA 2000 devices, and this was more evidence.

Testing_multi_sonar_support_on_a12_aboard_Raymariner_cPanbo.jpg

The bigger picture is that Raymariner -- there's also FLIRtacious in California, and many volunteer test vessels -- is a terriffic tool for testing the bejesus out of marine electronics.Helping R&D wring out new features and software is one thing, but also showed an elaborate test protocol on the laptop that gets applied in real world conditions to every model every time anything changes.

Raymariner_lower_helm_w_gS_19_cPanbo.jpg

Raymariner also had a new gS195 mounted next to the real lower helm station. It's very fast and you can see its vast screen area compared to the captain's e12 (which is sporting an extra wide bezel refit kit). Note the RMK-9 keypad; it's still primarily marketed as a gS Series accessory but in fact it can also extend hybrid touch to an aSeries (as can the Remote app on a smartphone, sort of). The small hardware change in the gS195 is the addition of an HD-SDI video input port. I'd never heard of the protocol myself but was told it's "future proofing" and also notice that Raymarine is now offering even FLIR's top end marine camera systems. Meanwhile, another feature of the new a9 and a12 models is support for analog as well as IP video -- perhaps because making IP boat cameras is harder than anticipated? -- and also the inclusion of a SeaTalkNG to DeviceNet adaptor cable with every unit (see "in the box" here). Many of us have known for a long time that STng and N2K work together fine, but having Raymarine declare that in such a material way is a good thing.

Raymariner_networking_wall_cPanbo.jpg

Of course also fascinated by the technology behind a test vessel that can support so much equipment. Here's a view of the networking wall in an aft utility cabin. Note how much updating must have happened when the relatively new RayNet Ethernet connector and HS5 switches came out (discussed here on Panbo). Also tucked away somewhere is a massive battery bank and various heavy duty inverters and DC voltage converters. And besides "four rows" of fixed sonar transducers, Raymariner also has two "moon pools" like the one below. Those three Airmar CHIRP transducers were installed in a blank fiberglass form that was then swapped with the one already bolted into the boat's starboard casing, no haul out required. Does anyone know of such a well-equiped marine electronics test vessel?

Raymariner_transducer_moon_pool_cPanbo.jpg

But an able test vessel doesn't mean much if the manufacturer involved doesn't also have solid R&D and manufacturing processes in place, which we believe Raymarine does.we think it's quite visible in the current product lines and quarterly LightHouse updates.We tend to think of Raymarine as a company that's been through a lot of changes, even hard knocks, in the last decade, and it has; but there's also a salty core of expertise that been there all along and now with some guidance from FLIR seems to be maximizing its potential.

Raymariner_flying_bridge_cPanbo.jpg